Effects of Starch and Heat on Characteristics and Properties of Charcoal Briquettes

Authors

  • Wiriya Dangton Department of Agricultural Machinery Engineering, Faculty of Engineering Rajamangala University of Technology Isan Khonkean campus
  • Arayan Wongniyom Department of Agricultural Machinery Engineering, Faculty of Engineering Rajamangala University of Technology Isan Khonkean campus
  • Kantapon premprayoon Department of Agricultural Machinery Engineering, Faculty of Engineering Rajamangala University of Technology Isan Khonkean campus
  • Veerayut Jeepetch Department of Agricultural Machinery Engineering, Faculty of Engineering Rajamangala University of Technology Isan Khonkean campus
  • Sukanya Thongyothee Department of Agricultural Machinery Engineering, Faculty of Engineering Rajamangala University of Technology Isan Khonkean campus

DOI:

https://doi.org/10.14456/jeit.2023.1

Keywords:

Charcoal, Charcoal briquettes, Heat

Abstract

This research aims to study the effects of starch and heat on the characteristics and properties of charcoal briquettes. The study of charcoal briquettes in spiral machine used in the case of mixing powder was used in the ratio of 1:1, for the case of heating the charcoal briquettes at 200°C. The results of the research found that mixing powder and heating with a charcoal briquette cylinder resulted in smooth, shiny, and non-cracking charcoal surfaces. It has a high calorific value of 27 MJ/kg. and relatively low humidity of 10.9 wt%. But if wanting to reduce moisture and increase heating value of charcoal briquettes more, it should be chosen in case of not mixing powder and heating. Because it has the lowest moisture content of 8.9 percent by weight and the highest heat value of 28.4 MJ/kg. However, if not mixed with charcoal powder, it will not be as smooth as if mixed with powder.

References

[1] K. Homchat and S. Ramphueiphad, "The continuous carbonisation of rice husk on the gasifier for high yield charcoal production," Results in Engineering, vol. 15, p. 100495, 2022.

[2] J. O. Ighalo, O. A. A. Eletta and A. G. Adeniyi, "Biomass carbonisation in retort kilns: Process techniques, product quality and future perspectives," Bioresource Technology Reports, vol. 17, p. 100934, 2022.

[3] ดวงกมล ดังโพนทอง และ วสันต์ ปินะเต, "การส่งเสริมการผลิตถ่านอัดแท่งจากเศษวัสดุเหลือใช้ทางการเกษตรเพื่อใช้ประโยชน์ในชุมชนระดับครัวเรือนตามหลักปรัชญาเศรษฐกิจพอเพียง," มหาวิทยาลัยราชภัฏมหาสารคาม, 2557.

[4] วีรชัย อาจหาญ, "การพัฒนาเครื่องอัดแท่งชีวมวลสำหรับใช้ผลิตถ่านชีวภาพ," มหาวิทยาลัยเทคโนโลยีสุรนารี, 2547.

[5] ปัญญา วงศ์ต่าย และ คมสัน มุ่ยสี, "การพัฒนาเครื่องคัดแยกผลไม้ต้นแบบสำหรับชุมชนเกษตรกรรมในจังหวัดจันทบุรี," รายงานโครงการวิจัย, มหาวิทยาลัยราชภัฏรำไพพรรณี, 2564.

[6] สหรัตน์ วงษ์ศรีษะ และ สิงห์แก้ว ป๊อกเทิ่ง, "การออกแบบและพัฒนาผลิตภัณฑ์ถ่านอัดแท่งจากวัสดุเหลือใช้ เพื่อทดแทนถ่านจากไม้," มหาวิทยาลัยเทคโนโลยีราชมงคลพระนคร, 2549.

[7] วานิช โสพาสพ, บุญยิ่ง อินทรบุตร และ สมพล พวงดอกไม้, "การผลิตถ่านอัดแท่งด้วยเศษวัสดุเหลือใช้เพื่อเป็นเชื้อเพลิงพลังงานทดแทน," มหาวิทยาลัยนเรศวร, 2550.

[8] ตุลย์ทิตย์ กัลยา, "การพัฒนาเครื่องต้นแบบเพื่ออัดถ่านหินแบบก้อนโดยใช้การหมุนอัดเพลาคู่," มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ, 2550.

[9] K. Duanguppama, N. Pannucharoenwong, S. Echaroj, C. Turakarn, K. Chaiphet and P. Rattanadecho, "Processing of Leucaena Leucocepphala for renewable energy with catalytic fast pyrolysis," Energy Reports, vol. 8, pp. 466-479, 2022.

Downloads

Published

2023-04-29

How to Cite

[1]
W. Dangton, A. Wongniyom, K. premprayoon, V. Jeepetch, and S. Thongyothee, “Effects of Starch and Heat on Characteristics and Properties of Charcoal Briquettes”, JEIT, vol. 1, no. 2, pp. 1–7, Apr. 2023.