Design and Capability Analysis of a Solar-Powered Conveyor for Water Hyacinth Removal: A Case Study at Kumphawapi Flood Gate
Keywords:
Water Hyacinth, Process Capability, Machinery Design, Conveyor SystemAbstract
Water hyacinth is a fast-growing invasive plant that disrupts water management in tropical regions. This study presents the design and capability analysis of a solar-powered conveyor system for large-scale water hyacinth removal, demonstrated at the Wiang Kham Sluice Gate, Kumphawapi District, Udon Thani, Thailand. The prototype incorporates conveyor belts, picker wheels, and a photovoltaic power supply sized for off-grid operation. Motor drive requirements were calculated from friction, load, and torque data, while process capability indices (Cp) were applied to assess the stability of motor efficiency and removal rate. Experimental results indicated that a 1.5 kW motor was sufficient for both conveyor and picker wheel assemblies, maintaining efficiency above 76%. The machine achieved an average removal capacity of 60 t/h with Cp = 1.17, demonstrating acceptable yet further-optimizable process stability, suggesting potential for performance refinement through parameter adjustment. Economic analysis indicated that the proposed system has an estimated operating cost of around USD 2,700 per 58 ha per cycle, corresponding to a 3–6× cost reduction compared with conventional methods. These findings highlight the feasibility of integrating renewable energy with mechanical design for sustainable aquatic weed management.
References
[1] I. Ashraf, S. R. Ahmad, U. Ashraf, and M. Khan, “Community perspectives to improve flood management and socio-economic impacts of floods at Central Indus River, Pakistan,” International Journal of Disaster Risk Reduction, vol. 92, p. 103718, 2023.
[2] Z. A. Kaiser, “Analysis of the livelihood and health of internally displaced persons due to riverbank erosion in Bangladesh,” Journal of Migration and Health, vol. 7, p. 100157, 2023.
[3] M. Srisawas, T. Kerdkaew, and P. Chanlert, “From invasive species to bio-based composites: Utilizing water hyacinth for sound absorption and insulation,” Industrial Crops and Products, vol. 220, p. 119242, 2024.
[4] E. K. Onyari, G. U. Fayomi, and A. T. Jaiyeola, “Unveiling the situation of water hyacinth on freshwater bodies in Nigeria and South Africa: Management, workable practices and potentials,” Case Studies in Chemical and Environmental Engineering, vol. 10, p. 100974, 2024.
[5] A. M. Villamagna and B. R. Murphy, “Ecological and socio-economic impacts of invasive water hyacinth (Eichhornia crassipes): A review,” Freshwater Biology, vol. 55, no. 2, pp. 282–298, 2010.
[6] S. Patel, “Threats, management and envisaged utilizations of aquatic weed Eichhornia crassipes: An overview,” Environmental Science and Bio/Technology, vol. 11, no. 3, pp. 249–259, 2012.
[7] M. Tariq, K. N. Mohammad, B. Ahmed, M. A. Siddiqui, and J. Lee, “Biological synthesis of silver nanoparticles and prospects in plant disease management,” Molecules, vol. 27, no. 15, p. 4754, 2022.
[8] S. Rezania, M. Ponraj, M. F. Din, A. R. Songip, F. M. Sairan, and S. Chelliapan, “The diverse applications of water hyacinth with main focus on sustainable energy and production for new era: An overview,” Renewable and Sustainable Energy Reviews, vol. 41, pp. 943–954, 2015.
[9] B. Parida, S. Iniyan, and R. Goic, “A review of solar photovoltaic technologies,” Renewable and Sustainable Energy Reviews, vol. 15, no. 3, pp. 1625–1636, 2011.
[10] Y. Anker, B. Doktor, A. Dahan, V. Mirlas, A. Gimburg, S. Petlakh, and M. Averbukh, “Solar-powered wastewater treatment: Integrating pumped storage and hydroelectric generation for autonomous operation,” Energy Reports, vol. 14, pp. 2247–2263, 2025.
[11] K. Sharma, S. Kothari, N. L. Panwar, and N. Rathore, “Design and development of solar energy powered maize milling machine,” International Journal of Ambient Energy, vol. 43, no. 1, pp. 1671–1676, 2022.
[12] B. Denkena, E. Abele, C. Brecher, M. A. Dittrich, S. Kara, and M. Mori, “Energy efficient machine tools,” CIRP Annals, vol. 69, no. 2, pp. 646–667, 2020.
[13] P. Liu, J. Tuo, F. Liu, C. Li, and X. Zhang, “A novel method for energy efficiency evaluation to support efficient machine tool selection,” Journal of Cleaner Production, vol. 191, pp. 57–66, 2018.
[14] C. Zhao, M. Dinar, and S. N. Melkote, “A data-driven framework for learning the capability of manufacturing process sequences,” Journal of Manufacturing Systems, vol. 64, pp. 68–80, 2022.
[15] T. C. Wang, B. M. Hsu, and M. H. Shu, “Quick-switch inspection scheme based on the overall process capability index for modern industrial web-based processing environment,” Applied Stochastic Models in Business and Industry, vol. 38, no. 5, pp. 847–861, 2022.
[16] K. Deepak, M. A. Frikha, Y. Benômar, M. El Baghdadi, and O. Hegazy, “In-wheel motor drive systems for electric vehicles: State of the art, challenges, and future trends,” Energies, vol. 16, no. 7, p. 3121, 2023.
[17] R. Wrobel, “A technology overview of thermal management of integrated motor drives–electrical machines,” Thermal Science and Engineering Progress, vol. 29, p. 101222, 2022.
[18] Z. Wang, J. Li, C. Hu, X. Li, and Y. Zhu, “Hybrid energy storage system and management strategy for motor drive with high torque overload,” Journal of Energy Storage, vol. 75, p. 109432, 2024.
[19] L. T. Siow, J. R. Lee, E. H. Ooi, and E. Von Lau, “Application of graphene and graphene derivatives in cooling of photovoltaic (PV) solar panels: A review,” Renewable and Sustainable Energy Reviews, vol. 193, p. 114288, 2024.
[20] R. Mott, Machine Elements in Mechanical Design, Pearson, 2014.
[21] M. Aishwarya and R. M. Brisilla, “Design of energy-efficient induction motor using ANSYS software,” Results in Engineering, vol. 16, p. 100616, 2022.
[22] P. L. Ramos, A. P. Silva Figueiredo, D. Carvalho do Nascimento, F. Moala, and E. Flores, “Beyond regular SPC: Bridging the Cpk capability index for (a) symmetric data,” Annals of Data Science, vol. 12, no. 5, pp. 1607–1633, 2025.
[23] T. H. Lin, L. C. Huang, Y. Y. Chen, L. C. Lee, and D. Y. Lin, “Implementing process capability index (Cpk) for effective product quality stabilization: The case of a lock manufacturing company,” Sensors and Materials, vol. 37, no. 3, pp. 1211–1223, 2025.
[24] I. Hrvacic, “Design and implementation of SPC systems in defense industry manufacturing process,” Periodicals of Engineering and Natural Sciences, vol. 6, no. 1, pp. 27–40, 2018.
Downloads
Published
How to Cite
Issue
Section
Categories
License
Copyright (c) 2026 Journal of Engineering and Industrial Technology, Kalasin University
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
ลิขสิทธิ์ของวารสาร
เนื้อหาและข้อมูลในบทความที่ลงตีพิมพ์ในวารสารศูนย์ดัชนีการอ้างอิงวารสารไทย ถือเป็นข้อคิดเห็นและความรับผิดชอบของผู้เขียนบทความโดยตรงซึ่งกองบรรณาธิการวารสาร ไม่จำเป็นต้องเห็นด้วย หรือร่วมรับผิดชอบใด ๆ
บทความ ข้อมูล เนื้อหา รูปภาพ ฯลฯ ที่ได้รับการตีพิมพ์ในวารสารศูนย์ดัชนีการอ้างอิงวารสารไทย ถือเป็นลิขสิทธิ์ของวารสารศูนย์ดัชนีการอ้างอิงวารสารไทย หากบุคคลหรือหน่วยงานใดต้องการนำทั้งหมดหรือส่วนหนึ่งส่วนใดไปเผยแพร่ต่อหรือเพื่อกระทำการใด จะต้องได้รับอนุญาตเป็นลายลักอักษรจากวารสารศูนย์ดัชนีการอ้างอิงวารสารไทยก่อนเท่านั้น
