Preparation and Characterizations of Hydroxyapatite Substituted Boron Cement

Piyanan Boonphayak; Sirikarn Khansumled; Adisorn Pinmanee; Supakit Phromduang

doi:10.14456/nujst.2018.30

Authors

Piyanan Boonphayak Department of Industrial Engineering, Engineering Faculty, Naresuan University
Sirikarn Khansumled Department of Industrial Engineering, Engineering Faculty, Naresuan University
Adisorn Pinmanee Department of Industrial Engineering, Engineering Faculty, Naresuan University
Supakit Phromduang Department of Industrial Engineering, Engineering Faculty, Naresuan University

DOI:

https://doi.org/10.14456/nujst.2018.30

Keywords:

Bioceramics, Hydroxyapatite substitution, Boronhydroxyapatite, Boron, Citric acid

Abstract

The aim of this research is studying the produce boron substitution into hydroxyapatite (20BHA) cement powder and investigate the effect of citric acid on the compressive strength of new cement. 20BHA cement powder was synthesized by the co-precipitation method at room temperature. Phase and chemical structure of 20BHA powder were confirmed by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). The morphology in the cements was confirmed by scanning electron microscope (SEM). The effects of adding citric acid to 20BHA powder was found to have a significant effect on the compressive strength properties of cement. Increasing the concentration of citric acid in 20BHA powder was found to have an effect on the large compressive strength.

References

Ambard, A. J., & Mueninghoff, L. (2006). Calcium phosphate cement: Review of mechanical and biological properties. Journal of Prosthodontics, 15(5), 321-328. https://doi.org/10.1111/j.1532-849X. 2006.00129.x

Anwar, A., Asghar, M. N., Kanwal, Q., Kazmi, M., & Sadiqa, A. (2016). Low temperature synthesis and characterization of carbonated hydroxyapatite nanocrystals. Journal of Molecular Structure, 1117, 283-286. https://doi.org/10.1016/j.molstruc.2016.03.061

Arora, M. (2013). Polymethylmethacrylate bone cements and additives: A review of the literature. World Journal of Orthopedics, 4(2), 67-74. https://doi.org/10.5312/wjo.v4.i2.67

Cullity, B. D. (1978). Elements of X-ray diffraction. American Journal of Physics, 25(6), 394. https://doi.org/10.1119/1.1934486

Fleet, M. E. (2009). Infrared spectra of carbonate apatites: ν2-Region bands. Biomaterials, 30(8), 1473-1481. https://doi.org/10.1016/j.biomaterials.2008.12.007

Ginebra, M. P. (2009). Cements as bone repair materials. Technical University of Catalonia (UPC), Spain. Retrieved from https://doi.org/10.1533/9781845696610.2.271

Kolmas, J., Velard, F., Jaguszewska, A., Lemaire, F., Kerdjoudj, H., Gangloff, S. C., & Kaflak, A. (2017). Substitution of strontium and boron into hydroxyapatite crystals: Effect on physicochemical properties and biocompatibility with human Wharton-Jelly stem cells. Materials Science and Engineering: C, 79, 638–646. https://doi.org/10.1016/J.MSEC.2017.05.066

Landi, E., Tampieri, A., Celotti, G., & Sprio, S. (2000). Densification behaviour and mechanisms of synthetic hydroxyapatites. Journal of the European Ceramic Society, 20(14–15), 2377–2387. https://doi.org/ 10.1016/S0955-2219(00)00154-0

Larsson, S., & Fazzalari, N. L. (2014). Anti-osteoporosis therapy and fracture healing. Archives of Orthopaedic and Trauma Surgery, 134(2), 291–297. https://doi.org/10.1007/s00402-012-1558-8

Magnan, B., Bondi, M., Maluta, T., Samaila, E., Schirru, L., & Dall’Oca, C. (2013). Acrylic bone cement: Current concept review. Musculoskeletal Surgery, 97(2), 93–100. https://doi.org/10.1007/s1230 6-013-0293-9

Nabiyouni, M., Ren, Y., & Bhaduri, S. B. (2015). Magnesium substitution in the structure of orthopedic nanoparticles: A comparison between amorphous magnesium phosphates, calcium magnesium phosphates, and hydroxyapatites. Materials Science and Engineering C, 52, 11-17. https://doi.org/10.1016/j. msec.2015.03.032

Pan, Y., & Fleet, M. E. (2002). Compositions of the Apatite-Group Minerals: Substitution Mechanisms and Controlling Factors. Reviews in Mineralogy and Geochemistry, 48(1), 13-49. https://doi.org/10.21 38/rmg.2002.48.2

Pattanayak, D. K., Divya, P., Upadhyay, S., Prasad, R. C., Rao, B. T., & Rama Mohan, T. R. (2005). Synthesis and evaluation of hydroxyapatite ceramics. Trends in Biomaterials and Artificial Organs, 18(2), 87-92.

Ratnayake, J. T. B., Mucalo, M., & Dias, G. J. (2017). Substituted hydroxyapatites for bone regeneration: A review of current trends. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 105(5), 1285-1299. https://doi.org/10.1002/jbm.b.33651

Safronova, T. V., Putlyaev, V. I., Shekhirev, M. A., Tretyakov, Y. D., Kuznetsov, A. V., & Belyakov, A. V. (2009). Densification additives for hydroxyapatite ceramics. Journal of the European Ceramic Society, 29(10), 1925-1932. https://doi.org/10.1016/j.jeurceramsoc.2008.12.012

Sun, Y., Kwok, Y. C., & Nguyen, N. T. (2006). Low-pressure, high-temperature thermal bonding of polymeric microfluidic devices and their applications for electrophoretic separation. Journal of Micromechanics and Microengineering, 16(8), 1681-1688. https://doi.org/10.1088/0960-1317/16/8/033

Šupová, M. (2015). Substituted hydroxyapatites for biomedical applications: A review. Ceramics International, 41(8), 9203-9231. https://doi.org/10.1016/j.ceramint.2015.03.316

Tenhuisen, K. S., & Brown, P. W. (1994). The effects of citric and acetic acids on the formation of calcium-deficient hydroxyapatite at 38 °C. Journal of Materials Science: Materials in Medicine, 5(5), 291–298. https://doi.org/10.1007/BF00122399

Ternane, R., Cohen-Adad, M. T., Panczer, G., Goutaudier, C., Kbir-Ariguib, N., Trabelsi-Ayedi, M., … Massiot, D. (2002). Introduction of boron in hydroxyapatite: Synthesis and structural characterization. Journal of Alloys and Compounds, 333(1-2), 62-71. https://doi.org/10.1016/S0925-8388(01) 01558-4

Xu, H. H. K., Wang, P., Wang, L., Bao, C., Chen, Q., Weir, M. D., … Reynolds, M. A. (2017). Calcium phosphate cements for bone engineering and their biological properties. Bone Research, 5, 17056. https://doi.org/10.1038/boneres.2017.56

Yılmaz, B., & Evis, Z. (2016). Boron-Substituted Bioceramics: A Review. Journal of Boron, 1(1), 6–14. Retrieved from http://journal.boren.gov.tr/article/view/5000176079

Zhang, W., Shen, Y., Pan, H., Lin, K., Liu, X., Darvell, B. W., … Huang, W. (2011). Effects of strontium in modified biomaterials. Acta Biomaterialia, 7(2), 800-808. https://doi.org/10.1016/j.actbio.201 0.08.031