Impact of Adjustable External Horizontal Shading Slats on Indoor Visual Comfort in Tropical Climate

Simeon Nyambaka Ingabo; Pipat Chaiwiwatworakul; Vichuda Mettanant

doi:10.14456/nujst.2020.3

Authors

Simeon Nyambaka Ingabo The Joint Graduate School of Energy and Environment, CHE Center for Energy Technology and Environment, King Mongkut’s University of Technology Thonburi, Bangkok 10140 Thailand
Pipat Chaiwiwatworakul The Joint Graduate School of Energy and Environment, CHE Center for Energy Technology and Environment, King Mongkut’s University of Technology Thonburi, Bangkok 10140 Thailand
Vichuda Mettanant Department of Mechanical Engineering, Faculty of Engineering and Industrial Technology, Silpakorn University, Nakhon Pathom Province 73000, Thailand

DOI:

https://doi.org/10.14456/nujst.2020.3

Keywords:

free view fraction, external horizontal slats, glare, energy savings

Abstract

The main function of windows is to provide natural light and a view of the outdoor surroundings. Excessive direct sunlight penetrating into interior spaces through the windows poses glare and contrast problems in addition to excessive beam solar radiation which leads to high cooling loads. Shading slats are installed to block beam radiation and enhance the general visual environment for building occupants. Despite their proven energy saving potential, building designers tend to shun these shading devices for reasons such as maintenance costs, aesthetics, glare possibility and their interference of occupants’ view of the outdoor surroundings. In this paper the impact of adjustable external horizontal shading slats on occupants’ visual comfort and view was investigated. Full scale experiments were conducted under the dynamic tropical climate of Thailand. Annual simulations using full-year weather records were undertaken for a model room for cases of north and south facing windows to establish appropriate monthly slat adjustment angles that block undesired direct sunlight while guaranteeing the maximum possible view of exterior surroundings. Window luminance and work plane illuminance levels were examined and compared with proposed thresholds for comfortable working environments from previous studies. Lighting energy consumption and savings were also investigated in comparison to windows with heat reflective glass, commonly preferred by building designers. The study showed that it is possible to save 40% to 60% of energy consumed by electric lamps, avoid glare and achieve a comfortable workspace with a good view of exterior surroundings for most of the year by use of adjustable external horizontal shading slats.

References

Chaiwiwatworakul, P., Chirarattananon, S., & Matuampunwong, D. (2012). Energy Saving Potential from Daylighting through External Multiple-Slat Shaded Window in the Tropics. International Journal of Renewable Energy Research, 2(3), 376-383.

Chaiwiwatworakul, P., Chirarattananon, S., & Rakkwamsuk, P. (2009). Application of automated blind for daylighting in tropical region. Energy Conversion and Management, 50(12), 2927-2943.

Chaiwiwatworakul, P., Fathoni, A. M., & Mettanant, V. (2016). Energy analysis of the daylighting from a double-pane glazed window with enclosed horizontal slats in the tropics. Energy and Buildings, 128, 413-430.

Chaiyapinunt, S., & Nopparat, K. (2013). Daylight availability and models for global and diffuse horizontal illuminance and irradiance for Bangkok. Solar Energy, 91, 174-185.

Chirarattananon, C., Chaiwiwatworakul, P., & Pattanasethanon, S. (2002). Daylight availability and models for global and diffuse horizontal illuminance and irradiance for Bangkok. Renewable Energy, 26(1), 69-89.

Da Silva, P. C., Leal, V., & Andersen, M. (2012). Influence of shading control patterns on the energy assessment of office spaces. Energy and Buildings, 50, 35-48.

Kolas, T. (2013). Performance of daylight redirecting venetian blinds for sidelighted spaces at high latitudes. (Doctoral dissertation). Retrieved from https://ntnuopen.ntnu.no

Parmelee, G.V., & Aubele, W.W. (1952). Daylight availability and models for global and diffuse horizontal illuminance and irradiance for Bangkok. Renewable Energy, 26(1), 69-89.

Perez, R., Ineichen, P., & Seals, R. (1990). Modeling daylight availability and irradiance components from direct and global irradiance. Solar Energy, 44(5), 271-289.

Tzempelikos, A. (2008). The impact of venetian blind geometry and tilt angle on view, direct light transmission and interior illuminance. Solar Energy, 82, 1172-1191.

Wirth, H., Gombert, A., Wittwer, V., & Luther, J. (1998). Directionally selective dielectric structures for solar radiation control. Solar Energy, 63(4), 269-275.